Industrial floors and floorings
FRP gratings for industrial floors and floorings are used in a wide variety of sectors. From the food and pharmaceuticals industries to car and aircraft manufacturers and other sectors besides, GEI-Fib fiberglass gratings are the solution to all your needs.
The benefits of FRP gratings for industrial floors and flooring
- Ease of use: fiberglass gratings can be cut to size on-site (bandsaw, chainsaw, etc.)
- Light weight makes them easy to handle.
- Highly resistant to corrosion, weather and UV radiation,
- Safety: concave or siliceous non-skid R13 for added stability,
- Quick assembly with specific retaining fasteners available from stock,
- Custom and stock gratings available at very short notice.
Custom manufacture:
GEI can manufacture made-to-measure steps to meet your requirements (layout, size, etc.). Profiles for balustrades and ladders with or without hoops can be manufactured on request.
Our research department is available to handle your technical requirements and your intended layouts, and can advise you on issues up to and including the realisation of your orders.
Mesh
GEI has a range of FRP gratings with different mesh types on offer:
- 38 x 38 – 26 x 26 – 50 x 50 – etc…
- Security bars: 19 x 19.
Bearer Bar
Standard dimensions: 30 / 7; 38 / 7 and 50 / 7 mm.
Standard panel dimensions
- 1000 x 2026 mm.
- 1000 x 3055 mm.
- 1220 x 3055 mm.
Standard dimensions stair treads with gritted front edge
- 800 x 275 mm.
- 1000 x 275 mm.
- 1000 x 350 mm.
Finishes
- Concave.
- Grit.
- Entirely grit-covered surface.
Finished Product
- We stock mats, stair treads and stair rails which are easy to assemble on site.
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
Load tables
Moulded FRP grating is manufactured from fibreglass-reinforced resin. It is composed of 65% resin for its chemical and UV resistance and is composed of 35% fibreglass for increased mechanical strength. GEI has 3 types of resin on offer with different degrees of resistance to chemical corrosion.
In stock
Isophthalic resin, fire retardant M1/F1 and resistant to corrosion and chemical products.
Vinylester resin resistant to the most severe chemical attack (high concentrations).
Grey
RAL 7035
Beige
RAL 1001
Anthracite
RAL 7012
Green
RAL 6010
Orange
RAL 2002
Upon manufacture
Orthophthalic resin resistant to a wide range of chemicals.
GEI also offers a range of accessories and special fastening systems for FPR gratings:
316 stainless steel clamp with 19 x 19 mesh washer. In stock.
316 stainless steel clamp with 30 x 30 mesh pin. In stock.
316 stainless steel stair support for 30 x 30 and 19 x 19 mesh. In stock.
Adjustable foot.
Dimensions of insert: 35 x 35 mm.
Thickness of insert: 20 mm.
Height of foot: 40 or 70 mm.
In stock.
FRP support bracket
Standard length: 3,000 mm.
Dimensions: 30 x 30 x 5 mm
and 50 x 50 x 6.35 mm.
Can be cut to size.
In stock.
