FRP gratings for staircase steps
GEI FRP staircase steps are manufactured with a siliceous nose and no step support. Used in the industrial, chemical and nuclear sector and in a range of other fields, fiberglass staircase steps offer numerous benefits, including their cost of manufacture.
Quick assembly with FRP grating fasteners in 316 stainless steel. Supplied with a clip or a washer and a screw+bolt+retainer for assembly.
Custom manufacture:
GEI can manufacture made-to-measure steps to meet your requirements (layout, size, etc.). Profiles for balustrades and ladders with or without hoops can be manufactured on request.
Mesh
GEI has a range of FRP gratings with different mesh types on offer:
- 38 x 38 - 26 x 26 - 50 x 50 - etc...
- Security bars: 19 x 19.
Bearer Bar
Standard dimensions: 30 / 7; 38 / 7 and 50 / 7 mm.
Standard panel dimensions
- 1000 x 2026 mm.
- 1000 x 3055 mm.
- 1220 x 3055 mm.
Standard dimensions stair treads with gritted front edge
- 800 x 275 mm.
- 1000 x 275 mm.
- 1000 x 350 mm.
Finishes
- Concave.
- Grit.
- Entirely grit-covered surface.
Finished Product
- We stock mats, stair treads and stair rails which are easy to assemble on site.
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
Load tables
The molded polyester grid is made of glass fiber reinforced resin. It is made of 65% resin for chemical and UV resistance and 35% fiberglass for high mechanical resistance. JK Technic offers you:
In stock
M1/F1 flame retardant isophthalic resin and resistant to corrosion and chemicals.
Grey
RAL 7035
Green
RAL 6010
Other colors are available upon manufacture
GEI also offers a range of accessories and special fastening systems for FPR gratings:
316 stainless steel clamp with 19 x 19 mesh washer. In stock.
316 stainless steel clamp with 30 x 30 mesh pin. In stock.
316 stainless steel stair support for 30 x 30 and 19 x 19 mesh. In stock.
Adjustable foot.
Dimensions of insert: 35 x 35 mm.
Thickness of insert: 20 mm.
Height of foot: 40 or 70 mm.
In stock.
FRP support bracket
Standard length: 3,000 mm.
Dimensions: 30 x 30 x 5 mm
and 50 x 50 x 6.35 mm.
Can be cut to size.
In stock.
