Staircase steps
GEI press-welded staircase steps are manufactured with a non-skid perforated nose and lateral covers with standard piercing or custom piercing on request. Used in industrial fields for their security mesh and without single notching (on request), GEI's staircase steps are suitable for all your projects. They can be used for straight staircases, balanced steps or even for spiral staircases.
Piercing intervals
Depending on the specifications, numerous standard piercing intervals are available and any other piercing is available on request.
| Steps width in mm | 150 to 159 | 160 to 169 | 170 to 179 | 180 to 189 | 190 to 199 | 200 to 249 | 250 to 279 | 280 to 309 | 310 to 339 | 340 to 369 |
| Dimensions d mm | 70 | 80 | 90 | 100 | 110 | 120 | 150 | 180 | 210 | 240 |
Several finishes available
- Untreated steel
- Power-coated steel
- Galvanized steel
Custom manufacture:
GEI can manufacture made-to-measure steps to meet your requirements (layout, size, etc.).
Our research department is available to handle your technical requirements and your intended layouts, and can advise you on issues up to and including the realisation of your orders.
Mesh
The mesh spacing is defined in accordance with the standards and loads that must be respected:
- Standard meshes: 30x30, 30x44, etc.
- Standard security meshes: 19x19, 19x40, 30x19, etc.
- EDF mesh: 30x27.
- Other options are available on request.
Bearer Bar
- Standard height: 25-60 mm.
- Standard thickness: 2-5 mm.
- Other options are available on request.
Cross Bar
- Twisted square: 4-6 mm.
- Smooth rounded configuration available on request.
Dimensions
- Maximum length of bearer bars: 6100 mm..
- Maximum length of twisted squares: 1000 mm, other options are available on request.
Material
- S235JR steel as per EN 10025 standards.
Surface Treatment
- Galvanized in accordance with EN ISO 1461 standards.
- Lacquered in accordance with standard RAL.
- Bituminous paint.
- Other options are available on request.
Finish
- The bearer bar may be notched on request.
Finished Product
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
- Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.
Load tables
Industry
- Thermal, hydro-electric, nuclear and solar power stations
- Chemical and oil industries
- Automotive and steel industry
- Shipbuilding
- Cement works
- Transformation and metallic construction
- Railings and fencing
- Emergency stairs
- Railway and transportation industries
- Drains and ventilation systems
Architecture
- Decoration
- Sun shadings
- Fencing
- Cladding
- Urban furniture
- Gangway
- Multisports grounds
Press-welded grating is obtained by electrical welded transverse bars, which are usually square and twisted (but can be round and straight) into the bearing bars. The grating is produced with “flat” banding, and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For an optimised anti-slip surface, it is possible to produce serrated press-welded grating, with serration on the bearing bars only. It is typically manufactured from EN 10025 standard S235JR steel which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.
STEP 1:
BBs and TBs fixed in place
STEP 2:
Electrowelding
