Live Delivery Tracking Check now online

Press-locked gratings for shelving

GEI press-locked gratings for shelving can be used for pallet racks and grating cantilevers, for storing heavier loads without the need for increased load absorption by the butt joints. Gratings for shelving are manufactured from S235JR steel and are also available with an press-welded finish.


Gratings for shelving offer numerous benefits:

  • Provide excellent rigidity and stability for items stored
  • Allows better visibility of items stored
  • Light can get through
  • Water can get through
  • Easy and quick to assemble

Finishes available :

  • Untreated
  • Galvanized
  • Power-coated steel

Depending on your requirements, 4 models can be manufactured:

Corner flap

This grating is particularly suitable for shelving with reduced-width shelves. Load absorption will be limited.

Technical drawing

Flanged edge

This grating is suitable for various types of shelving and offers numerous advantages, the most important of which is its cost of manufacture. The butt joint between the two edges provides greater load absorption and safety, and the flanged edge locks the grating in place on the racks.

Technical drawing

Flat edge

This grating offers good adherence and stability thanks to the contact between the lips on the underside and the racks.

Technical drawing

Notched edge

The butt joint between the two edges provides greater load absorption and the flanged edge provides safety.

Technical drawing



  • The mesh spacing is defined in accordance with the standards and loads that must be respected:
  • For a BB thickness of 2-3 mm:
  • The BB spacing is typically a multiple of 11.11.
  • The IB spacing is typically a multiple of 11.11.
  • For a BB thickness of 4-5 mm:
  • The BB spacing is typically a multiple of 18.
  • The IB spacing is typically a multiple of 17.
  • Other options are available on request.

Bearer bar

  • Standard height: 20-150 mm.
  • Standard thickness: 2-8 mm.
  • Other options are available on request.

Transvers bar

  • Spacer: 10 x 2 mm.
  • Other options are available on request.


  • Maximum length of bearer bars: 4000 mm.
  • Maximum length of spacers: 2000 mm.


  • S235JR steel as per EN 10025 standards..
  • Stainless steel 304 ( 1.4301 ).
  • Stainless steel 316 ( 1.4571 ).
  • Aluminium AlMg3.
  • Other options are available on request.

Surface treatment

  • Galvanized in accordance with EN ISO 1461 standards.
  • Lacquered in accordance with standard RAL.
  • Passivation.
  • Anodisation.
  • Bituminous paint
  • Other options are available on request.


  • Available with 'T' or 'flat' edge.
  • Available with single or double notching on request.
  • HALF-MOON or SAWTOOTH notching available.

Finished product

  • Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
  • Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.


GEI press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. GEI press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.


Step 1 :

BBs and TBs fixed in place

Assemblage caillebotis

Step 2 :


Assemblage caillebotis

Step 3 :

Application of banding bars

Assemblage caillebotis


Many customers and references

Browse our gallery of references in industry and architecture.

Discover our gallery
New ! Follow the progress of your order in a few clicks. Check your delivery