Facade boarding
Press-locked facade boarding is a signature feature of contemporary architecture and an innovative product that allows for optimum creativity in the visual design of modern or older buildings : floors, privacy-screens, metal staircases. In order to give an attractive appearance and a flawless finish, the meshes of different panels can be aligned.
Facade boarding is also available with slanted struts and with a stainless steel or aluminium finish.
Architecture
Press-locked facade boarding is a signature feature of contemporary architecture and an innovative product that allows for optimum creativity in the visual design of modern or older buildings : floors, privacy-screens, metal staircases. In order to give an attractive appearance and a flawless finish, the meshes of different panels can be aligned.
Custom manufacture:
GEI can manufacture made-to-measure facade boarding to meet your requirements (layout, size, etc.).
Mesh
The mesh spacing is defined in accordance with the standards and loads that must be respected:
- For a BB thickness of 2-3 mm:
The BB spacing is typically a multiple of 11.11.
The IB spacing is typically a multiple of 11.11. - For a BB thickness of 4-5 mm:
The BB spacing is typically a multiple of 18.
The IB spacing is typically a multiple of 17. - Other options are available on request.
Bearer Bar
- Standard height: 20-150 mm.
- Standard thickness: 2-8 mm
- Other options are available on request.
Transverse bars louvred
- Standard height: 10mm
- Other options are available on request.
Dimensions
- Maximum length of bearer bars: 4000 mm.
- Maximum length of spacers: 2000 mm.
Material
- S235JR steel as per EN 10025 standards.
- Stainless steel 304 ( 1.4301 ).
- Stainless steel 316 ( 1.4571 ).
- AlMg3 aluminium.
- Corten.
Surface Treatment
- Galvanized in accordance with EN ISO 1461 standards.
- Lacquered.
- Lacquered in accordance with standard RAL.
- Anodised.
- Other options are available on request.
Finish
- Available with 'T' or 'flat' edge.
- Available with single or double notching on request.
- Half-moon or sawtooth notching available.
Finished Product
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
- Plain or galvanised ½ laps, panels and staircase steps can be easily assembled on site.
Load tables
GEI press-locked grating is characterized by transverse, cross bars inserted under high pressure into pre-existing notches in the bearing bars. This grating is produced in “flat” or “T”-shaped sections, welded into place and then optionally undergoes hot-dip galvanizing in accordance with the applicable EN ISO 1461 standards. For situations with an increased risk of slipping, anti-slip grating can be produced, where the upper surface of the bearing bars and/or the transverse bars can be given anti-slip serrations. GEI press-locked grating is typically manufactured from EN 10025 standard S235JR steel, which ensures a consistent production quality. RAL-GZ 638 manufacturing tolerances applied.
STEP 1:
BBs and TBs fixed in place
STEP 2:
Press-locking
STEP 3:
Application of banding bars
