Staircase steps
GEI FRP staircase steps are manufactured with a siliceous nose and no step support. Used in the industrial, chemical and nuclear sector and in a range of other fields, fiberglass staircase steps offer numerous benefits, including their cost of manufacture.
Quick assembly with FRP grating fasteners in 316 stainless steel. Supplied with a clip or a washer and a screw+bolt+retainer for assembly.
Custom manufacture:
Custom manufacture:
GEI can manufacture made-to-measure steps to meet your requirements (layout, size, etc.). Profiles for balustrades and ladders with or without hoops can be manufactured on request.
Characteristics
Mesh
GEI has a range of FRP gratings with different mesh types on offer:- 38 x 38 – 26 x 26 – 50 x 50 – etc…
- Security bars: 19 x 19.
Bearer Bar
- Standard dimensions: 30 / 7; 38 / 7 and 50 / 7 mm.
Standard panel dimensions
- 1000 x 2026 mm.
- 1000 x 3055 mm.
- 1220 x 3055 mm.
standard dimensions stair treads with gritted front edge
- 800 x 275 mm.
- 1000 x 275 mm.
- 1000 x 350 mm.
Finishes
- Concave.
- Grit.
- Entirely grit-covered surface.
Finished Product
- We stock mats, stair treads and stair rails which are easy to assemble on site.
- Custom manufacture based on the dimensions given by the customer or on plans drawn up by our research department.
Manufacturing
Moulded FRP grating is manufactured from fibreglass-reinforced resin. It is composed of 65% resin for its chemical and UV resistance and is composed of 35% fibreglass for increased mechanical strength. GEI has 3 types of resin on offer with different degrees of resistance to chemical corrosion.
Isophthalic resin
Fire-resistant and corrosion and chemical-resistant RAL 6010 green
IN STOCK
Isophthalic resin
Fire-resistant and corrosion and chemical-resistant RAL 7035 grey
IN STOCK
Vinylester resin
with extremely high chemical resistance (high concentrations).
IN STOCK
Orthophthalic resin
with resistance to a wide range of chemicals.
ON REQUEST
Accessories
GEI also offers a range of accessories and special fastening systems for FPR gratings:
316 stainless steel clamp with 19 x 19 mesh washer. In stock.
316 stainless steel clamp with 30 x 30 mesh pin. In stock.
316 stainless steel stair support for 30 x 30 and 19 x 19 mesh. In stock.
Adjustable foot.
Dimensions of insert: 35 x 35 mm.
Thickness of insert: 20 mm.
Height of foot: 40 or 70 mm.
In stock.
FRP support bracket
Standard length: 3,000 mm.
Dimensions: 30 x 30 x 5 mm
and 50 x 50 x 6.35 mm.
Can be cut to size.
In stock.